Audient - iD14 Agrandir l'image

MICROPHONE PREAMPLIFIER:
(measurement includes ADC signal path)
LINE GAIN: -10 to 56 dB (-10dB hardwired line pad)
PHANTOM POWER: 48V ±4V @ 10mA/Channel (12VDC only)*
MIC EIN: <-127.0 dBu
CMRR: >80 dB @ 1kHz
MAXIMUM INPUT LEVEL: +12 dBu (0 dBFS digital Maximum)
INPUT IMPEDANCE (Mic): 2.8 kΩ Balanced
INPUT IMPEDANCE (Line): >8kΩ Balanced
FREQUENCY RESPONSE: ±0.1 dB 20Hz to 22kHz @ min. gain
±1.0 dB 20Hz to 22kHz @ max. gain
CROSSTALK: <-90 dBu
THD+N @ 0dBu (1kHz): 0.0025% (-92 dBu)
SNR: 96 dB un-weighted, 99 dB A-weighted
XLR Combi Female Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
1/4" TRS Jack Tip (Hot), Ring (Cold) & Sleeve (Shield)
D.I (Channel 1):
D.I GAIN: 0 to 66 dB (inc. +10 dB software boost)
MAXIMUM INPUT LEVEL: +9 dBu (0.6% THD typical)
INPUT IMPEDANCE: >500kΩ Unbalanced
FREQUENCY RESPONSE: ±0.1 dB 20Hz to 22kHz
THD+N @ 0dBu (1kHz): <0.04% all musical 2nd and 3rd harmonics
SNR: 95 dB un-weighted, 98 dB A-weighted
1/4” JACK: TIP (Hot) & SLEEVE (Shield)
ANALOGUE TO DIGITAL CONVERTER (ADC 1 & 2):
(measured sans microphone preamplifier under AES-17)
MAXIMUM INPUT LEVEL: +12 dBu (0 dBFS digital maximum)
DIGITAL REFERENCE LEVEL: +12 dBu = 0 dBFS
FREQUENCY RESPONSE: ±0.1 dB 10Hz to Fs/2 (flat to nyquist)
CROSSTALK: -100 dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz): <0.002% (-94 dB)
THD+N @ -6dBFS (1kHz): <0.0015% (-97 dB)
DYNAMIC RANGE: 113 dB un-weighted
116 dB A-weighted
DIGITAL TO ANALOGUE CONVERTER (DAC 1&2):
(measured under AES-17 at line outputs 1&2)
MAXIMUM OUTPUT LEVEL: +12 dBu (0 dBFS digital maximum)
DIGITAL REFERENCE LEVEL: +12 dBu = 0 dBFS
OUTPUT IMPEDANCE <100Ω
FREQUENCY RESPONSE: ±0.1 dB 10Hz to Fs/2 (flat to nyquist)
CROSSTALK: <-105 dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz): <0.003% (-90.5 dB)
DYNAMIC RANGE: 114 dB un-weighted
117 dB A-weighted
1/4" TRS Jack Tip (Hot), Ring (Cold) & Sleeve (Shield)
HEADPHONE OUTPUT (DAC 3&4):
(measured under AES-17 at phones output)
MAXIMUM OUTPUT LEVEL: +12 dBu
DIGITAL REFERENCE LEVEL: +12 dBu = 0 dBFS
VOLTAGE GAIN: +6 dB (optimised for loudness)
OUTPUT IMPEDANCE: <30 Ω Balanced
FREQUENCY RESPONSE: ±1.0 dB 10Hz to Fs/2 (load dependant)
CROSSTALK: -100 dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz): <0.002% (-94 dB)
DYNAMIC RANGE: 108 dB un-weighted
111 dB A-weighted
MAX LEVEL INTO 30ohms: +4 dBu, 0.005% THD+N, Power: 101mW
MAX LEVEL INTO 60ohms: +5 dBu, 0.004% THD+N, Power: 64mW
MAX LEVEL INTO 600ohms: +13 dBu, 0.0025% THD+N, Power: 39mW
1/4” JACK: TIP (Left), RING (Right) & SLEEVE (Shield)
DIGITAL INPUT:
8-CHANNEL ADAT: 44.1kHz to 48kHz
4-CHANNEL ADAT: 88.2kHz to 96kHz SMUX
STEREO S/PDIF / TOSLINK 44.1kHz to 96kHz (Stereo)
USB 2.0 HIGH SPEED:
BUS POWER: 500mA @5V System Limit
425mA @5V Maximum (No 48V)
(Phantom power only available on 12VDC)*
No. of INPUT CHANNELS: 10 (2 Analogue, 8 Digital)
No. of OUTPUT CHANNELS: 4 (4 Analogue)
DSP MIXER LATENCY: ROUND TRIP (in-to-out)

44.1kHz 1.660ms
48.0kHz 1.531ms
88.2kHz 0.844ms
96.0kHz 0.771ms

POWER SUPPLY: 12VDC Centre Positive - 1.25A
(required for full 48V Phantom Power)*
* iD14 requires a lot of power for class leading converters and class-A microphone preamplfiers.
We could not beat the laws of physics so an external supply is required for 48V phantom power.
Your microphones will thank you when they get enough voltage!

Plus de détails

AUDIA4AFC6

Nouveau

Audient - iD14

Audient

iD14 delivers the audio performance of a large format console in a compact and elegant desktop package. iD14 provides a pair of world-class Audient console mic pres, class-leading Burr Brown converter technology, console style monitor control, JFET D.I and the revolutionary ScrollControl. With its versatile feature set and intuitive layout, iD14 will become the hub of your studio in no time.

At a glance

  • 10-in/4-out USB Audio Interface
  • 2 x Class-A Audient Console Mic Preamplifiers
  • High Performance Burr Brown AD/DA Converters
  • iD ScrollControl Mode
  • 1 x Discrete JFET Instrument Input
  • Main Speaker Output
  • Independent Class-AB Headphone Output
  • Full Monitor Control Functionality (software controlled)
  • ADAT Input for Expandability
  • Low Latency DSP Mixer
  • USB2.0 Bus Powered
  • 24bit/96khz
  • All-Metal Enclosure

WORLD CLASS MIC PRES

The professional sound you deserve

We are the only company that use the same Class-A mic pre design throughout our entire product range, whether you’re in the studio with an Audient console or on the road with iD14, you’re always guaranteed the same world class Audient sound.

Developed by design legend David Dearden and optimised over 18 years of refinement, our mic pre is used by thousands of professional studios around the world. With its versatile nature and smooth tone, the iD14 will quickly become your ‘go to’ mic pre.

PRISTINE CONVERTER TECHNOLOGY

Brilliance on the inside enables brilliance on the outside

iD14 provides you with high performance AD-DA converters from Burr Brown, the leaders in converter technology. Quality in the analogue stages of design comes from years of experience as analogue console designers, and when coupled with outstanding converter technology it enables you to hear audio as it’s supposed to sound. The importance of converters should never be underestimated. Experience audio the Audient way.

THE REVOLUTIONARY ‘SCROLLCONTROL’

Simply scroll to control

Get hands on control of your software with iD14’s ScrollControl. With a touch of a button iD14’s volume encoder becomes a virtual scroll wheel that allows you to adjust DAW hosts, plug-in parameters, iD14’s mixer app and even scroll through your iTunes library - just like you’re adjusting a piece of hardware. Wherever your mouse pointer hovers, the iD knob can scroll to control!

PLUG AND PLAY

Plug in and be inspired

As well as offering you 2 channels of mic pre, iD14 has a harmonically rich JFET D.I input. Designed to replicate the input stage of a classic valve amplifier, you can plug your guitar, bass, keyboard or drum machine straight in and start recording instantly.

CONSOLE STYLE MONITOR CONTROL

Customise your control surface

It gets even better! When not using the virtual scroll wheel, the iD button can be assigned to control iD14’s monitoring features. Following in the footsteps of it’s critically acclaimed big brother iD22, we’ve still included DIM, CUT, Polarity Reverse, Mono Sum, Talkback and Cue Mix monitoring, all of which can be assigned to the iD button.

EXPAND

Grows with your needs

Need to track drums? No problem! As your system grows, iD14 can be expanded via the optical input connector, supporting both ADAT or S/PDIF. Enabling you to expand up to ten inputs via an eight-channel mic pre, such as the ASP800.

INTUITIVE SOFTWARE

Discover just how simple it can be

We understand the need to keep things simple and iD14’s mixer app was designed with that in mind. Whether you’re creating low latency cue mixes or utilising the flexible monitor control, iD14 tightly integrates the hardware and software making the recording process easy. Enabling you to concentrate on what’s really important - the music.

BUILT TO LAST

Quality deserves protection

iD14 has been designed to last, from its all-metal construction, hand finished aluminium knobs and high grade component selection, iD14 will stand up to countless late nights in the studio and days on the road.

Features And Specs

MICROPHONE PREAMPLIFIER:
(measurement includes ADC signal path)
LINE GAIN: -10 to 56 dB (-10dB hardwired line pad)
PHANTOM POWER: 48V ±4V @ 10mA/Channel (12VDC only)*
MIC EIN: <-127.0 dBu
CMRR: >80 dB @ 1kHz
MAXIMUM INPUT LEVEL: +12 dBu (0 dBFS digital Maximum)
INPUT IMPEDANCE (Mic): 2.8 kΩ Balanced
INPUT IMPEDANCE (Line): >8kΩ Balanced
FREQUENCY RESPONSE: ±0.1 dB 20Hz to 22kHz @ min. gain
±1.0 dB 20Hz to 22kHz @ max. gain
CROSSTALK: <-90 dBu
THD+N @ 0dBu (1kHz): 0.0025% (-92 dBu)
SNR: 96 dB un-weighted, 99 dB A-weighted
XLR Combi Female Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
1/4" TRS Jack Tip (Hot), Ring (Cold) & Sleeve (Shield)
D.I (Channel 1):
D.I GAIN: 0 to 66 dB (inc. +10 dB software boost)
MAXIMUM INPUT LEVEL: +9 dBu (0.6% THD typical)
INPUT IMPEDANCE: >500kΩ Unbalanced
FREQUENCY RESPONSE: ±0.1 dB 20Hz to 22kHz
THD+N @ 0dBu (1kHz): <0.04% all musical 2nd and 3rd harmonics
SNR: 95 dB un-weighted, 98 dB A-weighted
1/4” JACK: TIP (Hot) & SLEEVE (Shield)
ANALOGUE TO DIGITAL CONVERTER (ADC 1 & 2):
(measured sans microphone preamplifier under AES-17)
MAXIMUM INPUT LEVEL: +12 dBu (0 dBFS digital maximum)
DIGITAL REFERENCE LEVEL: +12 dBu = 0 dBFS
FREQUENCY RESPONSE: ±0.1 dB 10Hz to Fs/2 (flat to nyquist)
CROSSTALK: -100 dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz): <0.002% (-94 dB)
THD+N @ -6dBFS (1kHz): <0.0015% (-97 dB)
DYNAMIC RANGE: 113 dB un-weighted
116 dB A-weighted
DIGITAL TO ANALOGUE CONVERTER (DAC 1&2):
(measured under AES-17 at line outputs 1&2)
MAXIMUM OUTPUT LEVEL: +12 dBu (0 dBFS digital maximum)
DIGITAL REFERENCE LEVEL: +12 dBu = 0 dBFS
OUTPUT IMPEDANCE <100Ω
FREQUENCY RESPONSE: ±0.1 dB 10Hz to Fs/2 (flat to nyquist)
CROSSTALK: <-105 dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz): <0.003% (-90.5 dB)
DYNAMIC RANGE: 114 dB un-weighted
117 dB A-weighted
1/4" TRS Jack Tip (Hot), Ring (Cold) & Sleeve (Shield)
HEADPHONE OUTPUT (DAC 3&4):
(measured under AES-17 at phones output)
MAXIMUM OUTPUT LEVEL: +12 dBu
DIGITAL REFERENCE LEVEL: +12 dBu = 0 dBFS
VOLTAGE GAIN: +6 dB (optimised for loudness)
OUTPUT IMPEDANCE: <30 Ω Balanced
FREQUENCY RESPONSE: ±1.0 dB 10Hz to Fs/2 (load dependant)
CROSSTALK: -100 dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz): <0.002% (-94 dB)
DYNAMIC RANGE: 108 dB un-weighted
111 dB A-weighted
MAX LEVEL INTO 30ohms: +4 dBu, 0.005% THD+N, Power: 101mW
MAX LEVEL INTO 60ohms: +5 dBu, 0.004% THD+N, Power: 64mW
MAX LEVEL INTO 600ohms: +13 dBu, 0.0025% THD+N, Power: 39mW
1/4” JACK: TIP (Left), RING (Right) & SLEEVE (Shield)
DIGITAL INPUT:
8-CHANNEL ADAT: 44.1kHz to 48kHz
4-CHANNEL ADAT: 88.2kHz to 96kHz SMUX
STEREO S/PDIF / TOSLINK 44.1kHz to 96kHz (Stereo)
USB 2.0 HIGH SPEED:
BUS POWER: 500mA @5V System Limit
425mA @5V Maximum (No 48V)
(Phantom power only available on 12VDC)*
No. of INPUT CHANNELS: 10 (2 Analogue, 8 Digital)
No. of OUTPUT CHANNELS: 4 (4 Analogue)
DSP MIXER LATENCY: ROUND TRIP (in-to-out)

44.1kHz 1.660ms
48.0kHz 1.531ms
88.2kHz 0.844ms
96.0kHz 0.771ms

POWER SUPPLY: 12VDC Centre Positive - 1.25A
(required for full 48V Phantom Power)*
* iD14 requires a lot of power for class leading converters and class-A microphone preamplfiers.
We could not beat the laws of physics so an external supply is required for 48V phantom power.
Your microphones will thank you when they get enough voltage!

Commander

Audient - iD14

Audient - iD14

Veuillez patientez...

Pour le moment, M2M Pro a choisi la relation directe avec ses clients.
Les ventes, demandes d'offres et prix... se font via ce formulaire.
N'hésitez pas à prendre contact avec nous pour toute autre question.












* Champ requis

ou