TUBE TECH - MP2A Agrandir l'image
Impedance
Mic Input: 600/1200/2400 ohm
DI input: >1 Mohm/82 pF
Output: < 60 ohm
Frequency response @ -3 dB: 5 Hz to 60 kHz
Distortion THD+N @ 40 Hz
0 dBU< 0,10 %
+10 dBU < 0,10 %
Max. output: +26 dBU < 1 % THD
Max input without PAD: +6 dBU < 1 % THD
Max input with PAD: +26 dBU < 1 % THD
Noise Rg=200 ohm
Gain: +20 dB+60 dB
22Hz-22kHz: < -82 dBU < -60 dBU
CCIR-468-4: < -72 dBU < -50 dBU
CMRR @ 10 kHz: < -60 dB
Gain :
Mic Input: -10 +70 dB
DI input: 0 to 60 dB
Tubes
ECC 82 2 pcs.
ECC 83 4 pcs.
Dimensions
Height: 2 units 88 mm 3,5"
Width: 483 mm 19,0"
Depth: 165 mm 6,5"
Weight
Net: 4,3 kg 9,5 lbs.
Shipping: 6,1 kg 13,4 lbs.
Power requirements:
@ 115V/230V 30-45W

Plus de détails

TUBE9E4D0D

Nouveau

TUBE TECH - MP2A

Tube Tech

The MP 2A is a combined mic preamp/DI, based on a classic TUBE-TECH design, but featuring even higher fidelity and a few new features: An impedance switch to match the input perfectly to all types of microphones, an overload indicator and 2 dB gain steps

MP2A is the second in the new range of upgraded microphone preamplifier/DI's.( The modular PM1A was the first.) These new preamps features even higher headroom and fidelity than the earlier TUBE-TECH micpre''s.

Serious listening tests of the MP 2A have revealed a sound quality second to none, placing it among a handful of the worlds very best designs.

The MP 2A DI continues the TUBE-TECH tradition of extremely good sounding DI's, delivering world class sound for bass and guitar DI recordings. You simply won’t find a better DI than this!

The TUBE-TECH MP2A is a combined Microphone Preamplifier and Direct Instrument amplifier.

The input provides switchable +48 V phantom power, selectable mic. impedance of 600/1200/2400 Ohm, phase reverse switch, low-cut filter (20 Hz/40 Hz/off), as well as a switchable -20 dB pad.

Gain is adjustable from +10 dB to +70 dB.( 10db steps, coarse +2 dB steps, fine.) The Direct Instrument Input are unbalanced with a gain ranging from + 10 dB to + 60 dB.

The amplifier is all tube. Input transformer is enclosed in a MU-metal can. Input and output transformers come with a static screen between the primary and secondary wirings. The input and output are balanced as well as fully floating.

  • All-tube design featuring push-pull output amplifier
  •  Frequency response @ -3 dB: 5 Hz to 60 kHz
  • Typical noise: 5 dB @ 200Ω
  • CMRR: > 60 dB @ 10 kHz
  • Gain: +10 dB to +70 dB in 2 dB steps - DI gain: 0-60 dB
  • Selectable mic input impedance: 600 Ω/1.2 kΩ/2.4 kΩ
  • Selectable pad in front of input transformer (-20 dB)
  • Selectable +48 V phantom power
  • Low cut filter (20 Hz/40 Hz/Off)
  • Phase reverse
  • Overload indicator
  • Gold plated switches
  • DI jack input for a variety of instruments
  • DI input impedance > 1 MΩ
  • MU-metal shielded input transformer
  • In- and outputs are transformer balanced and fully floating

Features And Specs

Impedance
Mic Input: 600/1200/2400 ohm
DI input: >1 Mohm/82 pF
Output: < 60 ohm
Frequency response @ -3 dB: 5 Hz to 60 kHz
Distortion THD+N @ 40 Hz
0 dBU< 0,10 %
+10 dBU < 0,10 %
Max. output: +26 dBU < 1 % THD
Max input without PAD: +6 dBU < 1 % THD
Max input with PAD: +26 dBU < 1 % THD
Noise Rg=200 ohm
Gain: +20 dB+60 dB
22Hz-22kHz: < -82 dBU < -60 dBU
CCIR-468-4: < -72 dBU < -50 dBU
CMRR @ 10 kHz: < -60 dB
Gain :
Mic Input: -10 +70 dB
DI input: 0 to 60 dB
Tubes
ECC 82 2 pcs.
ECC 83 4 pcs.
Dimensions
Height: 2 units 88 mm 3,5"
Width: 483 mm 19,0"
Depth: 165 mm 6,5"
Weight
Net: 4,3 kg 9,5 lbs.
Shipping: 6,1 kg 13,4 lbs.
Power requirements:
@ 115V/230V 30-45W

Commander

TUBE TECH - MP2A

TUBE TECH - MP2A

Veuillez patientez...

Pour le moment, M2M Pro a choisi la relation directe avec ses clients.
Les ventes, demandes d'offres et prix... se font via ce formulaire.
N'hésitez pas à prendre contact avec nous pour toute autre question.












* Champ requis

ou