TUBE TECH - MMC 1A Agrandir l'image
Impedance
Mic input 600/1200/2400 Ohm
DI input < 1 MOhm
Line Input 20 kOhm
Output < 60 Ohm
Frequency response~-3dB5 Hz to 50 kHz
Distortion THD+N @ 40Hz
0 dBU 0,20 %
+10 dBU 0,20 %
Max. output: +26 dBU < 1 %
Max. input: +21 dBU < 1 %
Noise MicRg=200 Ohm
Gain @ 0 dB +60 dB
22 Hz-22 kHz < -80 dBU < -60 dBU
CCIR-468-4 < -70 dBU < -50 dBU
Noise LineRg=200 Ohm
@ 0 dB +10 dB
22 Hz-22 kHz < -80 dBU < -75 dBU
CCIR-468-4 < -70 dBU < -65 dBU
Noise DI Rg=1 MOhm
Gain @ 0 dB +50 dB
22 Hz-22 kHz < -80 dBU < -50 dBU
CCIR-468-4 < -70 dBU < -40 dBU
CMMR~10kHz<- 60dB
Gain
Mic +10 dB to +70 dB
Line -10 dB to +10 dB
DI 0 dB to +60 dB
Low, Mid & High band Off to +10 dB
Output Off to +10 dB
X-over frequenciesx1x4
Low & Mid band 60 to 300 Hz 0,24 to 1,2 kHz
Mid & High band 1,2 to 6 kHz
Compressor
Ratio: 2:1 to 10:1
Threshold off to -20 dBU
Attack 3 ms to 200 ms
Release: 60 ms to 2 s
Tubes
ECC 81 4 pc
ECC 82 1 pc
ECC 83 1 pc
Dimensions
Height: 2 units 88 mm 3,5”
Width: 483 mm 19,0”
Depth: 205 mm 8,1”
Weight
Net: 5,3 kg 11,7 lbs
Shipping: 6,1 kg 13,4 lbs
Power requirements@ 115 V/230 V, 50-60 Hz 30-45 W

Plus de détails

TUBEC1CEE0

Nouveau

TUBE TECH - MMC 1A

Tube Tech

Inspired by the success shown by our much-acclaimed TUBE-TECH SMC 2B Stereo Multiband Compressor, we have introduced this very special recording channel: A High End microphone preamplifier & multiband compressor with outstanding sonic properties – the MMC1A multiband recording channel

MMC1A can be a big help when recording or mixing difficult sources like very dynamic voices or instruments where the tonal character changes with level.

MMC1A can deliver "automated" control where it normally takes hours of work to achieve perfect results. Many singers have been "saved" by the MMC1A.

Try the MMC1A on bass, acoustic or electric, It''s amazing, how it makes the instrument sit perfect in the mix! Bass instruments can be dynamically treated to get rid of frequencies that makes the sound muddy.

MMC1A also opens up new exiting creative possibilities in recording and mixing full frequency range sources. Acoustic guitars and drums can be treated in a whole new way with endless possibilities.

The MMC1A is very often used to process vocals in sound reinforcement with excellent results.

The MMC 1A encompasses a complete front-end, including an additional direct Instrument input as well as a separate line input.

The microphone input has switchable loading impedance, phantom power, phase reversal and a –20 dB Pad. All inputs are equipped with a low-cut filter.

The 3-band optical compressor is designed to maintain optimum summing of all three bands with a remarkably flat frequency response. A bypass switch shorts out the whole compressor.

Mic. Input/Output are balanced and have fully floating transformers with a static screen.

The Line Input is unbalanced, but an optional transformer is available.

The power supply and the sidechain circuits are based on a solid state circuit. With the exception of the output stage all DC voltages are stabilised.

Features

  • Mic. Gain in 2 dB and 10 dB steps
  • Selectable mic. impedance 600/1200/2400
  • Phantom Power (+48V)
  • Phase reversal
  • 20 dB pad
  • High impedance Direct Input
  • Separate line input (gain +/- 10 dB)
  • Lowcut filter (20 Hz / 40 Hz/off)
  • Optical gain reduction elements
  • Cont. variable Threshold, Attack, Release
  • Ratio 2:1 to 10:1
  • LED display showing gain reduction
  • Low, Mid, High Output Gain: off to +10 dB
  • Variable X-over frequencies
  • Low noise < -80 dBu @ 0 dB gain
  • Master Output Gain: off to +10 dB

Features And Specs

Impedance
Mic input 600/1200/2400 Ohm
DI input < 1 MOhm
Line Input 20 kOhm
Output < 60 Ohm
Frequency response~-3dB5 Hz to 50 kHz
Distortion THD+N @ 40Hz
0 dBU 0,20 %
+10 dBU 0,20 %
Max. output: +26 dBU < 1 %
Max. input: +21 dBU < 1 %
Noise MicRg=200 Ohm
Gain @ 0 dB +60 dB
22 Hz-22 kHz < -80 dBU < -60 dBU
CCIR-468-4 < -70 dBU < -50 dBU
Noise LineRg=200 Ohm
@ 0 dB +10 dB
22 Hz-22 kHz < -80 dBU < -75 dBU
CCIR-468-4 < -70 dBU < -65 dBU
Noise DI Rg=1 MOhm
Gain @ 0 dB +50 dB
22 Hz-22 kHz < -80 dBU < -50 dBU
CCIR-468-4 < -70 dBU < -40 dBU
CMMR~10kHz<- 60dB
Gain
Mic +10 dB to +70 dB
Line -10 dB to +10 dB
DI 0 dB to +60 dB
Low, Mid & High band Off to +10 dB
Output Off to +10 dB
X-over frequenciesx1x4
Low & Mid band 60 to 300 Hz 0,24 to 1,2 kHz
Mid & High band 1,2 to 6 kHz
Compressor
Ratio: 2:1 to 10:1
Threshold off to -20 dBU
Attack 3 ms to 200 ms
Release: 60 ms to 2 s
Tubes
ECC 81 4 pc
ECC 82 1 pc
ECC 83 1 pc
Dimensions
Height: 2 units 88 mm 3,5”
Width: 483 mm 19,0”
Depth: 205 mm 8,1”
Weight
Net: 5,3 kg 11,7 lbs
Shipping: 6,1 kg 13,4 lbs
Power requirements@ 115 V/230 V, 50-60 Hz 30-45 W

Commander

TUBE TECH - MMC 1A

TUBE TECH - MMC 1A

Veuillez patientez...

Pour le moment, M2M Pro a choisi la relation directe avec ses clients.
Les ventes, demandes d'offres et prix... se font via ce formulaire.
N'hésitez pas à prendre contact avec nous pour toute autre question.












* Champ requis

ou