TUBE TECH - MEC 1A Agrandir l'image
Impedance
Input, Mic. Preamp: > 1,2 kOhm
Input, DI: > 1 Mohm/82pF
Frequency response @ -3dB 5 Hz to 80 kHz
DistortionTHD+N @ 40Hz
0 dBU 0,10 %
+10 dBU 0,10 %
Max. output: +26 dBU < 1 %
Max. input: +21 dBU < 1 %
Noise Rg=200 Ohm
Output Gain @ +20 dB +60 dB
22 Hz-22 kHz < -82 dBU < -60 dBU
CCIR-468-4 < -72 dBU < -50 dBU
CMMR @ 10 kHz < - 60 dB
Gain(0 to 10dB, 1dB step) (20 to 60dB, 10dB step)
Mic. Preamp 20 to 70 dB
DI 10 to 60 dB
Compressor
Ratio: 1,5:1 to 10:1
Threshold off to –20 dBU
Attack 1 ms to 100 ms
Release: 60 ms to 2 s
Tubes
ECC 813 pc
ECC 821 pc
ECC 833 pc
Dimensions
Height: 2 units 88 mm 3,5”
Width: 483 mm 19,0”
Depth: 205 mm 8,1”
Weight
Net: 5,5 kg 12,1 lbs
Shipping: 6,9 kg 15,2 lbs
@ 115 V/230 V, 50-60 Hz 30-45 W

Plus de détails

TUBEE47BF3

Nouveau

TUBE TECH - MEC 1A

Tube Tech

The MEC 1A is an all-tube mono recording channel, combining the classicTUBE-TECH designs: MP 1A mic preamp, EQ 1A active EQ and CL 2A compressor in one powerful, 2U recording package.

The MEC 1A delivers true TUBE-TECH sound: Full and warm, yet open and transparent.

MEC 1A is a compact and cost effective solution if you need a superior front end that will deliver top quality recordings, no matter what source you are working with.

The TUBE-TECH MEC 1A Recording Channel is a one channel recording unit, featuring a microphone preamplifier equalizer and compressor. At the heart of the shelving and bell filters you will find a tube operational amplifier.

The MEC 1A is all tube based except for the power supply. Input and Output have fully floating transformers. All DC voltages are stabilized, except the anode voltage for the output stage.

General:

  • Freq. response @-3 dB: 5 Hz - 60 kHz
  • Low noise: < -85 dBU @ 10 dB gain
  • CMRR: > 60 dB @ 10 kHz
  • Output gain: Off to +10 dB
  • Clickless swap relay (EQ <-> comp)
  • Separate in/out switch per section
  • Conductive plastic potentiometers
  • Gold plated switches
  • Fully regulated power supply with torodial transformer
  • All-tube design (except PSU & sidechain circuit)
  • In- and output are transformer balanced and fully floating

Microphone preamplifier:

  • Gain: +20 to +70 dB (DI:10-60 dB)
  • Input impedance: > 1.2 kΩ
  • +48V phantom power, phase reverse, -20 dB pad, low cut
  • DI input impedance > 1 MΩ

Equalizer: 

  • Active, tube based equalizer
  • Three bands
  • 6 low shelving frequencies
  • 6 high shelving frequencies
  • Bell-type Mid with 12 selectable frequencies & variable Q

Opto Compressor:

  • Low distortion optical gain reduction element
  • Ratio: 1.5:1 to 10:1
  • Variable attack and release
  • VU meter shows output or compression
  • Linkable for stereo applications

Features And Specs

Impedance
Input, Mic. Preamp: > 1,2 kOhm
Input, DI: > 1 Mohm/82pF
Frequency response @ -3dB 5 Hz to 80 kHz
DistortionTHD+N @ 40Hz
0 dBU 0,10 %
+10 dBU 0,10 %
Max. output: +26 dBU < 1 %
Max. input: +21 dBU < 1 %
Noise Rg=200 Ohm
Output Gain @ +20 dB +60 dB
22 Hz-22 kHz < -82 dBU < -60 dBU
CCIR-468-4 < -72 dBU < -50 dBU
CMMR @ 10 kHz < - 60 dB
Gain(0 to 10dB, 1dB step) (20 to 60dB, 10dB step)
Mic. Preamp 20 to 70 dB
DI 10 to 60 dB
Compressor
Ratio: 1,5:1 to 10:1
Threshold off to –20 dBU
Attack 1 ms to 100 ms
Release: 60 ms to 2 s
Tubes
ECC 813 pc
ECC 821 pc
ECC 833 pc
Dimensions
Height: 2 units 88 mm 3,5”
Width: 483 mm 19,0”
Depth: 205 mm 8,1”
Weight
Net: 5,5 kg 12,1 lbs
Shipping: 6,9 kg 15,2 lbs
@ 115 V/230 V, 50-60 Hz 30-45 W

Commander

TUBE TECH - MEC 1A

TUBE TECH - MEC 1A

Veuillez patientez...

Pour le moment, M2M Pro a choisi la relation directe avec ses clients.
Les ventes, demandes d'offres et prix... se font via ce formulaire.
N'hésitez pas à prendre contact avec nous pour toute autre question.












* Champ requis

ou