Liste de produits par fabricant - Crane Song

  • Afficher :
par page
  • Input and Output : Pin 2 is Sig + , Pin 3 is Sig- , Pin 1 is GND Connections Power: 100, 120, 230,240 volt; 50/60 Hz; 55 watts MDL 0.6A Fuse for 100V and 120V MDL 0.3A Fuse for 230V and 240V Pilot Lamp: # 7335 Shipping Weight: 19 lbs. (8.6 kg) Depth Behind Panel: 12.5 inches (31.75 cm) plus cabling Panel Height: 2 rack spaces

    0 €HTVA
  • Maximum input: +24dbu balanced, +16dbu unbalanced Maximum output: +24dbu balanced Hipass Filter: 3 pole, 18db per octave, 8 frequencies 148 Hz, 130 Hz, 1 17 Hz, 100 Hz, 81 Hz, 63 Hz, 48 Hz, 33 Hz Gain: 0 to 66 db, 1 steps Gain Insturment Input: 0 to 30 db, 1 db steps Mic Impedance: 200K, 2.2k, 300 ohms Insturment Impedance: 1.2 Meg ohm Noise: EIN -127.5...

    0 €HTVA
  • Connections: The input and output are balanced, with the output being transformer balanced. Signal Level: The maximum specified signal level is +26 dbu Noise Floor: -82.5 dbu measured 20Hz to 20 kHz Power: 110mA with 16 volt bipolar power supplies Tube: 12AX7B Attack Time: For a 12 db change, 100uS; 7mS; 20mS Release Time: For a 12 db change, 75mS to...

    0 €HTVA
  • Analog Output: Transformer-less balanced floating stereo output with XLR connectors. Digital zero is +16dBm. This allows 12 db of headroom above a +4dBm 0 VU. Gain adjust trims are on the back panel Analog Input: Transformer-less balanced floating stereo with XLR connectors. Digital zero is +16dBm. This allows 12 db of headroom above a +4dBm 0 VU. Gain...

    0 €HTVA
  • Input: Floating, balanced. Maximum input is +25 dBm. The connectors are XLR. Output: Floating, balanced. Maximum output is +25 dBm. The connectors are XLR. Input and Output : Pin 2 is Sig + , Pin 3 is Sig- , Pin 1 is GND Connections Power: 100, 120, 230,240 volt; 50/60 Hz; 55 watts MDL .6A Fuse for 100V and 120V MDL .3A Fuse for 230V and 240V Noise:...

    0 €HTVA
  • Maximum input: +24dbu Maximum Output: +25dbu Frequency Response: 1Hz to 100KHz Noise Floor: -84 dbu 20Hz to 20KHz Input Impedance: 32K ohms Output Impedance: 160 ohms Current Consumption: 120mA Weight: 1.7 lbs Number of Channels: 1 Number of EQ Sections: 37 SWITCHED RANGES High Pass: 7 + Flat Low Pass: 7 + Flat Low Shelf: 8 (10 Hz - 200 Hz) Mid Bell: 8...

    0 €HTVA
  • CROSS TALK measured main output, gain set to 0 1 kHZ -122 dB 10 kHz -100 dB THD + NOISE MAIN OUTPUT INPUT 0 dBFS GAIN SET TO -6 dB 0.0005% INPUT -6 dBFS 0.0003% MAIN OUTPUT MAX LEVEL +24 dbu FIXED OUTPUT MAX LEVEL +18 dbu NOISE MAIN OUTPUT GAIN =0 -93 dbu A-weighted GAIN =0 -90 dbu AES17 HEADPHONES GAIN = 0 NOISE -88 dbu , AES17 MAX OUTPUT +24 dbu POWER...

    0 €HTVA
  • Input XLR connectors Pin 2 is Sig + , Pin 3 is Sig- , Pin 1 is GND Power: 100, 120, 230,240 volt; 50/60 Hz; 55 watts MDL 2.0A Fuse for 100V and 120V MDL 1.5A Fuse for 230V and 240V Clipping: +25 dbm in the analog section Pilot Lamp: # 7335 Shipping Depth Panel Height: 2 rack spaces for power supply 4 rack spaces for main unit

    0 €HTVA
  • Compressor Attack Time: FAST; measured by doing 18 dB of Gain Reduction. The time to 18 dB of Gain Reduction is less than 1mS. 12 dB of the 18 are reached in .4mS. SLOW; for 6 dB of GainReduction, 100mS Compressor Release Time: FAST; From 12 dB of Gain Reduction to No Gain Reduction. 11 of 12 dB are reached in 50mS (Non Program Dependant Release) SLOW; 20...

    0 €HTVA
  • Pad: 0, -15, -25 db steps Max Gain: 65db Filter: 90Hz 24 db/oct Power: 100mA with self resetting fuses At 40db of gain, 0dbu output and a 150 ohm source Harmonic Distortion : 0.5% second harmonic Noise: -84dbu Frequency Response: 6Hz to 80Khz Tube: 12AX7B, selected for low microphonics Lundahl Mu metal shielded transformers for both input and output

    0 €HTVA
Résultats 1 - 12 sur 14.