Contrôleurs de moniteurs  Il y a 12 produits.

  • Afficher :
  • STEREO ATTENUATOR Pristine Sound • Affordable and Easy to Use   100% passive line attenuator. Does not color or negatively affect sound quality. Convenient, one-knob stereo level control. Transparent, noise-free level control for any line-level source. Desktop powered monitor control. Super handy Mute/Panic button prevents speaker-damaging thumps...

  • Direct coupled, discrete, class-A signal path 3 stereo mix inputs, 2 stereo tape return inputs, RCA stereo input 2 stereo speaker outputs Audiophile 0.1% matched resistor, stepped attenuator for control room level Independent studio/phones send and level External meter output Control room and Studio headphone output

  • Gain Tracking Accuracy: better than 0.05dB for 6 channels THD+N: 0.002% IMD: 0.003% Frequency Response: 1Hz-100kHz   -0.1 dB Crosstalk Rejection: >95dB Nominal Input Level: +4dBu or -10dBV Crossover: -3dB @57Hz 18dB/Octave modified Butterworth/Chebyshev Headphone Amp: 0.002% THD+N Headroom: +25 dBu to main outputs Dynamic range : 110dB Maximum level: +25dBu

  • Gain Tracking Accuracy better than 0.05dB for 6 channels THD+N 0.002% IMD 0.003% Frequency Response 1Hz-100kHz    -0.1dB Crosstalk Rejection >95dB Nominal Input Level: +4dBu or -10dBV Crossover -3dB @ 57Hz 18dB/octave modified Butterworth/Chebyshev Dynamic range 110dB Maximum level +25dBu Headphone...

  • Input 1 to Selected Line Out and Speakers: Frequency Response: +0, -0.5dB from <10 Hz to >80 kHz THD+N: < 0.0025%  @+4dBu IMD  (SMPTE):  < 0.0025%  @ +4dBu Crosstalk rejection:  >108dB Noise: < -93 dB, unweighted NOTE: Speaker outs can run at -6dB (factory setting) or unity gain (remove jumpers 3 and 4)...

  • INPUT Maximum Input Level 27dBu OUTPUT Maximum Output Level before clipping 27dBu DYNAMIC RANGE @ unity gain 117dB CROSSTALK L/R @ 1kHz >84dBAdjacent Input >95dB THD & NOISE unity gain 0dBu input 0.003% FREQUENCY RESPONSE 20Hz-20kHz +/- 0.2dB PHASE RESPONSE 20Hz-20kHz +/- 2degrees max POWER REQUIREMENTS External Power SupplyInput: 100-240V ~...

  • THD+N 1kHz, 22Hz-22kHz BW @1.0V out, no load   <0.002% @1.0V out, 32 Ohm load   <0.010% Intermodulation Distortion SMTPE/DIN 4:1 50Hz, 7kHz @1.0V out, no load   <0.008% @1.0V out, 32 Ohm load   <0.009% Frequency Response +/-3dB Fs=96kHz   0.5-45.9kHz Dynamic Range 20-22kHz bandwidth   112dB 20-22kHz bandwidth and A weighting filter   115dB...

  • ANALOG I/O THD+N at Maximum Volume, 1kHz, 22Hz-22kHz BW +20dBu out <0.0008% +10dBu out <0.0008% 0dBu out <0.002% Intermodulation Distortion SMTPE/DIN 4:1 50Hz, 7kHz @+20dBu out <0.002% @ 0dBu out <0.0015% Frequency Response Balanced Inputs +/-3dB 3Hz to 1.25MHz Unbalanced Input +/-3dB 3Hz to 275kHz Dynamic Range 20-22kHz...

  • ANALOG INPUT THD+N @ 0dB gain, 1kHz +20dBu out <0.001% (0.00075% typical) +10dBu out <0.003% (0.001% typical) 0dBu out <0.009% (0.005% typical) Intermodulation Distortion SMTPE/DIN 4:1 50Hz, 7kHz @+20dBu out <0.002% (0.0015% typical)...

  • SPECIFICATIONS ANALOG IN Gain - Balanced Input Headphone output, volume at maximum 0dB Balanced Line output, volume at maximum -0.5dB Unbalanced Line output, volume at maximum -8.0dB Frequency Response - Unbalanced In > Unbalanced Out...

Résultats 1 - 12 sur 12.