Modules 500  Il y a 109 produits.

  • Afficher :
par page
  • Minimum Gain 14.5 dB, 1dB with Pad Maximum Gain (continuously variable) 60 dB (70 dB in Ribbon Mode) Frequency Response (-3 dB) < 10 Hz to  > 200 kHz typical -1.0 dB @ 10 Hz typical  -1.5 dB @ 200 kHz Noise  (60 dB Gain, 10 Hz - 30 kHz, Inputs common) -130 dB EIN Total Harmonic Distortion + Noise  (35 dB Gain, 10 Hz - 20 kHz bandwidth, +24 dBu Out)...

  • Launched in 1970, the 1073 is the first choice of leading producers and artists, delivering the unique Neve sound on some of the most famous recordings of the past 40 years. Classic transformer microphone preamp amp (Class A design) Neve designed hand-wound transformers Both Mic and Line inputs are transformer balanced and earth free Gain knob with...

  • Launched in 1970, the original Neve 1073 module is perhaps the world's most famous and desirable microphone preamp and EQ for recording vocals and instruments of all types. Legendary 3-band EQ design Rotary controls provide accurate adjustment of the 1073 3-band EQ and High Pass filter Signal presence LED illuminates green from a level of -25dB and red...

  • Originally designed in 1974, the Neve 2264A mono Limiter/Compressor unit quickly became a legend. Classic mono Limiter/Compressor, available in a 500-series format Transformer-coupled circuits used in Input, Bridge-driver, Side-chain and Output stages Independent Limiter and Compressor IN/OUT selectors BYPASS switch connects input terminals directly to...

  • Not everyone has room for the world's greatest recording console - the Neve 88RS - but now there's no need to settle for anything other than the absolute best when it comes to capturing the beauty, energy and excitement of your recording? True Neve 88RS mic preamp in a 500-series format, with transformer-coupled Mic input, electronically balanced Line...

  • A three-position sidechain contour switch Eight-LED gain reduction meter Pushbutton for distortion Pushbutton for bypass. The ratio control features five positions ranging from 2:1 to 20:1, with a sixth position marked as 4 The BAC’s sidechain toggle switch offers a choice of three possible settings: flat, high-pass filter (cut off around 70 to 100 Hz)...

  • Class A (DSOP2) Output specs. Frequency response: 20Hz to 20kHz +- 0.5dB, Maximum Output = +26dBu @ 1kHz, Noise = -90dB @ 20Hz to 20kHz. Output connections: XLR’s on rear panel of API rack Phoenix Audio’s unique Class A, transformerless, True balanced Mic input stage. Custom wound Phoenix output transformer. Microphone input: XLR’s  Rear Panels of API...

  • Frequency response: 20Hz to 20kHz +- 0.5dB Maximum Output Level: +26dBu @ 1kHz Noise: -90dB @ 20Hz to 20kHz. Input level range: -10dBu to +10dBu Gain Meter: LED Metering (Green = -2dB, +4dbu & +10dbu Yellow = +13dB, Red = +16dbu) 24v built PSU

    0 €HTVA
  • Unique design allows unit to run at 24v for true-to-form Class-A operation. Phoenix Audio’s unique Class A, transformerless, electronically balanced buffer amp input stage. Class-A, DSOP-2 output stage with custom-wound transformer. Frequency response: 20Hz to 20kHz +- 0.5dB.  Maximum Output gain = +15dBu @ 1kHz, Noise = -90dB @ 20Hz to 20kHz, maximum...

    0 €HTVA
  • Special design allows 24v operation for true-to-form Class-A operation, a Phoenix Audio innovation. Frequency Response: 20Hz to 20Khz +/- 0.5dB Maximum Output: +26dBu @ 1Khz Noise: 90dB @ 22Hz to 22KHz DI Input Impedance 10Mohm Inputs: 1/4" jack (TS) input & through input on the front panel Transformer isolated balanced output (XLR) on the rear panel...

    0 €HTVA
Résultats 49 - 60 sur 109.