Processeurs d'effets  Il y a 8 produits.

  • Afficher :
  • Digital Interfaces Sample Rates 96 kHz, 88.2 kHz, 48 kHz, 44.1 kHz, Word Clock, AES, S/PDIF, ADAT Digital Inputs/Outputs 2 Channels of AES/EBU, S/PDIF (Optical or Coaxial) or ADAT Lightpipe Analog Input (XLR)Impedance20 kOhmsFull Scale Input Level26 dBuDynamic Range>104 dBSignal to Noise Ratio>104...

  • Analog Inputs Inputs 24-bit conversion Any combination of 2 XLR (20kW, bridging) or 2 mono jacks (150kW) Impedance 20 K Ohm (bridging) Full Scale Input Level 26 dBu Dynamc Range >105dB Signal-to-Noise Ratio >105dB, A-weighted THD+N...

  • Digital Interface Sample Rates 96kHz, 88.2kHz, 48kHz, 44.1kHz via FireWire, AES/EBU, S/PDIF, ADAT, or word clock DIGITAL Inputs/Outputs AES DB-25: 8 channels of AES...

  • Rear Panel ConnectorsPower Input: 90-240VAC, 50-60 Hz, 40WFootpedal: 1/4” TRS phone jackMIDI: standard MIDI Input and Output connectorsS/PDIF: Coaxial, RCA-typeInputs: XLR (2) and 1/4” TRS phone jacks (2); balanced or unbalanced operationAnalog Outputs: XLR (2) and 1/4” TRS phone jacks (2)AudioFrequency Response Wet 20 Hz-16 kHz, ±1 dBDynamic Range >...

  • ANALOG INPUTSConnectors One 25-pin Dsub female connectorImpedance 20K Ohm, balancedLevel (for 0dBFS) +4dBu mode: +20dBu –10dBV mode: 8.2dBuFreq Response @96K 20Hz - 22kHz, ±.15dB 20Hz - 46kHz ±.5dBA/D Conversion 24 bitsA/D Dyn Range 112dB unweighted, 115dB A-weightedTHD < 0.002% 20 → 20kHz @ +4dBuCrosstalk @ 1Khz <–75dB at 20 → 20k with a +20dBu...

  • ANALOG INPUTSConnectors Two, Female XLRImpedance 20K Ohm, balancedLevel (for 0 dbFS) +4dBu mode: +20dBu -10dBV mode: 8.2dBuFreq Response @96K 20Hz to 40KHz, +0/-3dBA/D Conversion 24 bitsA/D Dyn Range >112 dB unweighted, 115dB A-weightedTHD <.002% 20 - 20kHz @ +4dBuCrosstalk @ 1Khz <-90 dB, 20 - 20k at +20dBu inputANALOG OUTPUTConnectors Two, Male...

  • ANALOG INPUTSConnectors Two, Female XLRImpedance 20K Ohm, balancedLevel (for 0 dbFS) +4dBu mode: +20dBu -10dBV mode: 8.2dBuFreq Response @96K 20Hz to 40KHz, +0/-3dBA/D Conversion 24 bitsA/D Dyn Range >112 dB unweighted, 115dB A-weightedTHD <.002% 20 20kHz @ +4dBuCrosstalk @ 1Khz <-90 dB, 20 20k at +20dBu input signalANALOG OUTPUTConnectors Two,...

  • ANALOG INPUTSConnectors One 25-pin Dsub female connectorImpedance 20K Ohm, balancedLevel (for 0dBFS) +4dBu mode: +20dBu –10dBV mode: 8.2dBuFreq Response @96K 20Hz - 22kHz, ±.15dB 20Hz - 46kHz ±.5dBA/D Conversion 24 bitsA/D Dyn Range 112dB unweighted, 115dB A-weightedTHD < 0.002% 20 → 20kHz @ +4dBuCrosstalk @ 1Khz <–75dB at 20 → 20k with a +20dBu...

Résultats 1 - 8 sur 8.