Compresseurs - Limiteurs - Gates  Il y a 71 produits.

  • Afficher :
par page
  • Inputs: Balanced XLR Outputs: Balanced XLR Ext. sidechain inputs: Balanced TRS Signal transformers: Carnhill Bypass: hard relay bypass Input impedance: 2k5Ohms or 10kOhms switched on the front panel Output impedance: 50Ohms Frequency response: 20-22.000Hz Maximum input level : + 21 dBu @ sensitivity +4 dBu Maximum output level: +23 dBu S/N ratio...

    0 €HTVA
  • MIC/LINE Input: Transformer balanced XLR (Carnhill UK) DIRECT Input: Un-balanced TS 1/4" Output: Transformer balanced XLR (Carnhill UK) Input impedance: Mic 600Ohms , Line 10KOhms, Direct 1MOhms Output impedance: 600Ohms Insert: Balanced TRS 1/4" (separated SEND and RETURN) Mic gain: -5 to +65dB Line gain: -25 to +45dB Output gain: Acting as a console...

    0 €HTVA
  • GAIN RANGE Input Trim -10 - +10dB Output Trim -10 - +10dB Compression Threshold Range -15 - +15 dBu Attack Range 3 - 200 ms Release Range 0.03 - 3 s Ratio Range 1:1 - 12:1 Gain Reduction 0 - 20dB...

  • Inputs: Balanced XLR and 1/4" jack (1/4" normalled priority)Outputs: Balanced XLR and 1/4" parallel jacksPower Consumption, Quiescent: 7.81 WattsInput Impedance: 15K Ohms BalancedBandwidth: +/- 0.5 dB, 20 Hz - 50 kHzTHD+N @ 1 kHz, +4 dBu: <0.005%Maximum Level: +19 dBuSignal-to-Noise Ratio: -88 dBu (comp in)-92 dBu...

  • 10:1 Limiter and 3:1 Compressor ratios All-tube audio path uses 5751 and 6922 dual triodes Balanced Manley IRON® transformer-coupled XLR Inputs XLR impedance-balanced outputs BYPASS switches and AUTOMUTE with warm-up delay Large illuminated VU meters read Gain Reduction or Output levels STEREO LINK Side-Chain High-Pass Filter Universal internal power...

  • Features: Manley IRON® input transformers 4 x hand-matched 6BA6 vacuum tubes Balanced XLR inputs & outputs Manley HIP function raises soft dynamics without squashing louder passages High Voltage Switched Mode Power Supply custom designed for our vacuum tube audio circuits Controls and Switches: INPUT Level Preset 3-way switches -3dB, 0, +3dB...

  • Input Tubes: 2 x 12AT7A NOS GE specially selected by Manley Labs for lo-noise and stable biasOutput Tubes: 2 x 6414W NOS USA dual triodesI/O: MANLEY transformer coupled Balanced Inputs and OutputsMicpre: Selectable 48V phantom power and PHASE REVERSEGain: 60dB max Micpre, 43dB max DI, 20dB max Limiter GainInput Impedance: 2000Ohms Micpre, 1MegOhms DIFET...

  • MANLEY input & output transformers with nickel laminations in mu-metal cases with flat frequency response from 20Hz-25KHz BALANCED INPUTS & OUTPUTS (600 Ohms) Fully differential ALL-TUBE circuitry using one each 5670, 5751 (or 12AX7), 7044 (or 5687), & 12AL5 per channel Independently regulated B+ and Heater supplies Hard-wire BYPASS switch...

  • The Mastering Version of our Variable Mu® Limiter Compressor incorporating detented and logable steps built with 1% metal film resistors on sealed gold-contact Grayhill switches is available. NO, we will not mod a "normal" unit to the Mastering Version. The switches specifically are like this: Input: -4 to +4 in 2 dB steps Output: -11 to 0 in 1/2 dB steps...

  • Threshold Range Infinite to +20 dBu, Continuously Adjustable Maximum Output Level > + 32 dBu Maximum Input Level + 30 dBu Output Gain Control Continuously Adjustable Frequency Response +0 / -3 dB sub 2 Hz to beyond 100 kHz Noise (20 Hz - 22 kHz) -87 dBu (SS), -82 dBu (VT) Attack Range 2 ms to 100 ms, Continuously...

  • The original 2254 units are still sought after, decades after production stopped, and they remain one of the milestone pieces of studio equipment. Classic mono limiter/compressor made to the exacting late-1960s design Hand-made in Burnley, England using original Neve specification transformers Original Neve 2254 discrete, Class A circuit design...

Résultats 37 - 48 sur 71.