Compresseurs – Limiteurs – Gates  Il y a 73 produits.

  • Afficher :
par page
  • INPUT IMPEDANCE 20KOhmMAXIMUM INPUT LEVEL +21dBu (+17dB ref. +4dBu)OUTPUT IMPEDANCE50 OhmMAXIMUM OUTPUT LEVEL +20dBuBANDWIDTH < 12Hz to 35KHz -1dBCROSSTALK @10kHz Better than -80dB@20kHz Better than -75dBOUTPUT BALANCE Better than 40dB 20Hz to 10kHzINPUT CMRBetter than 40dB 20Hz to 10kHzNoise at unity gain reference +4dBu Wideband22Hz - 22KHzCCIR...

  • Input impedance20Kohms balanced Maximun input level+21.5dBu Bandwidth±1dB 20Hz to 34Hz Noise(Ref to +4dBu,gate open) -93dB(Ref to +4dBu,gate closed) -98dB Headroom(Ref to +4dBu) +16dB Dynamic Range109dB Crosstalk-93dB Key input impedance100k Distortion0dBu+10dBu 100Hz-015%-015%...

  • Input impedance20Kohm (balanced) Key input impedance20Kohm (unbalanced) Maximun input level+21dBu Maximun key input level+21dBu Output impedance50 ohm (balanced) Maximun output level+21dBu Bandwidth < 10Hz to 21 KHz -1dB Floor level-90dB,(or -20dB)...

  • INPUT IMPEDANCE20KOhm MAXIMUM INPUT LEVEL +17dB OUTPUT IMPEDANCE50Ohm (bal) MAXIMUM OUTPUT LEVEL+17dB BANDWIDTH 23Hz to 31KHz -1dB NOISE AT UNITY GAIN ref 0dB, GATE open Wideband22Hz - 22KHzCCIR ARM IEC A Q-Pk CCIR AV-90dB-95dB-95dB-97dB -84dB RMS-88dB-93dB-93dB-95dB...

  • Maximum Gain: Approximately 17 dBFrequency Response (with Input Attenuator set to -6 dB): 20 Hz to 20 kHz +/– 1.3 dBFrequency Response (with Input Attenuator set to 0 dB, Zsource = 100 1): 15 Hz to 53 kHz +/– 1.3 dBLine Input: 600 1 floating transformer balancedSidechain Input Impedance: 1200 1 floating transformer balancedLine Output Impedance: 120 1...

  • The Ultimate Mastering Tool100% Discrete Class-A Integrated M/S Matrix Feed Forward & Feedback Auto Fast Audio Filter Sidechain Filter Parallel Compression Signal Matrix Soft Clip Limiter Switchable Transformers Analog Dynamic LED Meter Passive Current Attenuator T16 Heater Stepped & Matched Potentiometers VOVOX Sound Conductors Technical Data

  • The Creative Compressor100% Discrete Class-A Auto Fast Anti Log Negative Ratios Audio Filter External Sidechain Gain Reduction Limiter Analog Dynamic LED Meter Transconductance Amplifier T12 Heater Technical Data

  • The Universal CompressorDiscrete Class-A Topology Auto Fast Log Release Negative Ratios Parallel Compression Sidechain Filter External Sidechain Gain Reduction Limiter Warm Mode Analog Dynamic LED Meter Stepped Potentiometers Technical Data

  • Freq. Response is 2 Hz to 60 kHz in clean audio mode (+0, -3 dB). Dynamic Range 110 dB from maximum output (20%THDsoft clipping) to minimum output. Greater than 100 dB signal to noise. Distortion Ranges between .06% and 20% depending on mode and settings. DC coupled Input and Outputs High quality audio caps used internally. Compressor Time Constants -...

  • Freq. response is 2 Hz to 160 kHz in clean audio mode (+0, -3 dB). Response is shaped in distortion modes (Dist 2, Dist 3). Dynamic range 110 dB from max. output to min. output in 1:1 mode. Greater than 100 dB signal to noise in distort 3 mode. Distortion ranges between .02% and 20% depending on distortion mode and release times set on front panel....

  • Inputs: Electronically balanced XLR Outputs: Electronically balanced XLR Bypass: hard relay bypass Input impedance: 48KΩ Output impedance: 50Ω Frequency response: 20-22.000Hz Maximum input level : + 21 dBu @ sensitivity +4 dBu Maximum output level: +23 dBu S/N ratio (A-weighted) : better than 85dBu Meter: 0 to -20dB gain reduction Signal path: Class-A,...

    0 €HTVA
  • Inputs: Balanced XLR Outputs: Balanced XLR Ext. sidechain inputs: Balanced TRS Signal transformers: Carnhill Bypass: hard relay bypass Input impedance: 2k5Ohms or 10kOhms switched on the front panel Output impedance: 50Ohms Frequency response: 20-22.000Hz Maximum input level : + 21 dBu @ sensitivity +4 dBu Maximum output level: +23 dBu S/N ratio...

    0 €HTVA
Résultats 25 - 36 sur 73.